My Third Space Kit - The ORIGINAL Cylon Raider!
This plane is such a nice flyer. Up until I built this one the Enterprise-D was the best flying spaceplane... not anymore! The Cylon is such an amazing floater and it is extremely nimble too.
The plane uses a 3 channel system with Aileron, Elevator and Throttle so any 3 channel or higher radio will work. It is fully aerobatic and with the recommended power system it can go vertical right into space!
Check out the build thread on RCGroups
Here is a video of the Prototype Maiden Flight.
I am offering this plane as a CNC Cut Foam kit out of the White Model Plane Foam. There is a very detailed build guide that comes with the kit that explains every step of the build in detail including pictures that show the progress.
The kit goes together very easily with as there are not very many pieces to the kit. You will need to provide all of the build hardware: Carbon Tubing, Carbon Flats, Gorilla Glue, and Pushrod wire.
The recommended hardware uses the very popular and low cost Brushless Motor, 1300mah to 1800mah 11.1v 3s Lipo Battery and 9g Hextronic Servos.
The build guide provides links for all hardware that is needed.
I am now offering this kit with custom designed printed skins - Ready for applying! The skins are printed on tissue paper and designed to be applied with the "decoupage" method. This makes a beautiful highly detailed plane that has a nice glossy finish.
Full Skin Set will make this thing an amazing looking plane.
ˇ Saucer Width: 35
ˇ Length: 23
ˇ Flying Weight: 12oz.
ˇ Thrust using recommended power system: 22 oz!
ˇ Motor: Turnigy 2210-1400 (210 Watt) Brushless Motor
ˇ ESC: 18 amp or larger
ˇ Servos: Hextronic 9g and 5g servos (1 of each)
ˇ Battery: 1300 1800 mah 11.1v 3s 20c Lithium Polymer battery
ˇ Radio: 3 channel or larger radio no special mixes required.
Note: This is an unassembled kit only. I am supplying the foam and skins only.